Fender - Dimension IV - sound expander
cred: reverb.com/The Jam Room
Fender - VARIABLE DELAY - ECHO-REVERB
"1969 ... Variable Delay Oil Can Unit manufactured by Tel Rey. It’s a 12ax7 model."
cred: reverb.com/Stuart Smith Reverb Store
scientificguitarist - Don't Tell Ray - PT2399-Based Oil Can Delay
DIY oilcan delay kit
"When it comes to delay, we are all aware of the tape, analog, digital, and even magnetic drum style delays like the Echorec. However, there is one design that has been almost lost to time, and that is the oil can delay. Invented by the founder of Tel-Ray, the oil can delay operates by using a spinning magnetic disk with carbonized rubber read and write heads. The disk spins in a can of special oil that helps to keep the rubber heads lubricated and to help prevent the leakage of the magnetically stored data.
In the guitar pedal world, there has been a small resurgence of interest in the oil can delay due to its unique, murky sound. Old Blood Noise Endeavors and Catalinbread both have digital emulations of them, but as far as I could tell, no DIY designs existed. I decided to see what I could do with the ubiquitous PT2399. Over the course of a few months, I spent hours reading and watching everything I could find on them, detailing things like delay time ranges, RPM, methods of degradation, etc. so that I could take them into account as best I could. While I don't claim this circuit to be an exact emulation, it does a great job of getting some of that super old school vibe in a DIY-able circuit. And because it's supposed to mimic a Tel-Ray, I have decided to call it Don't Tell Ray."
Gibson - Reverb Echo - GA-4RE '66 "Adineko oil can delay system by Ray Lubow inside. It's a kind of magic when you look on this system detailed and understanding it could delaying the sound. Three RCA tubes on board -- 12AU7 and 2x 6EU7."
Have a look at that snap fastener for the footswitch!
cred: facebook.com/Al Soulman
Fender - SPECIAL EFFECTS CENTER
"The mythical Fender Special Effects Center, from the early years of the CBS takeover. The Dimension IV oilcan delay combined with a fuzz circuit - trippy! This is complete apart from one mechanical part for driving the rotating drum. . These used conductive fluid in a rotating drum for the delay - I have some, the formula was rediscovered some time ago and an enterprising character bought a barrel of it - UCON LB65, which I think may be some kind of brake fluid. . It was long thought that the fluid was strongly carcinogenic and many techs were reluctant to work on them. . There is a forum for oilcan delay enthusiasts. They have a unique sound. Someone has even attempted a stompbox approximation - the Catalinbread Adineko. . http://telrayoilcanaddicts.yuku.com/forums/63/TelRay-Oilcan-Addicts-Board-General-Discussions"
cred: instagram.com/huphreybarclay
VOX - Model V807 ECHO REVERB
and the story about disc-echoes:
“ Ray Lubow and the Electrostatic Storage System Tape based echo effects units for guitar were growing in popularity in the late 1950s. These units recorded the original or "dry" signal from a guitar onto a loop of audio tape that passed over a series of playback heads, creating the "wet" effect of an echo. However, tape based echo units required frequent head cleanings and periodic replacements of the tape loop. Electronic technician and entrepreneur Ray Lubow invented an echo device in 1958 that eliminated the need for audio tape and multiple tape heads. Lubow's motor driven "electrostatic storage system" and "delay apparatus" were granted US patents in 1960. Ray Lubow and his brother Marvin founded "Tel-Ray," a company located in Gardena CA dedicated to the production of tapeless echo effects devices for musical instruments. At the heart of Lubow's "tapeless echo" design was a spinning platter oriented vertically inside a steel can. The specially treated metallic surface of the platter acted as a capacitor, allowing charges to be stored on it's surface. Several neoprene brushes made contact with the spinning platter. One brush recorded the audio signal onto the platter in the form of an electrostatic charge while several other brushes spaced around the platter played the sound back. The delay in playback caused by the rotation of the platter created an echo effect. Lubow's patent called for adding about a tablespoon of oil to the inside of the steel can to improve performance. A slight oil coating on the platter lubricated the brushes and helped the recorded signal from discharging prematurely. As a result, Lubow's electrostatic memory disk earned the nickname "oil can delay." The Thomas Organ "Electrostatic Memory Disk" Prior to acquiring the trademark rights for the Vox brand in 1965, Thomas Organ developed an echo circuit including an "electrostatic memory disk" for their home organs. Thomas adapted this echo circuit from their home organs for the Vox V807 Standard Echo Reverb. While Fender, Gibson and others were willing to pay Tel-Ray a license fee to utilize the tapeless echo design, Thomas Organ was not. The engineers at Thomas Organ designed an motor driven electrostatic echo storage device similar to the unit detailed in Lubow's patents but the Thomas version eliminated the need for oil. This small change may have been all that was necessary to work around the patents. The photo above of the rear of the V807 Standard Echo Reverb chassis offers a view of the rear plastic cover of the belt driven Thomas electrostatic memory unit. The thick wire located at the 2 o'clock position of the rear cover connected to the brush that recorded the electrostatic audio signal onto the spinning platter. The playback signal was picked up by wires mounted to brushes located at the 9, 10 and 3 o'clock positions on the plastic cover. The black grounded wire at the 4 o'clock position appears to connect to an "erase" brush. Grounding an area of the the disk would remove the electrostatic charge, erasing the recorded signal.“
cred: voxshowroom.com
TEL RAY - ADINEKO - Ad-n-echo - Model 1001
oilcan delay - s.more oilcan delays
cred: reverb.com/alfredo’s Gear Outlet
Fender - DIMENSION IV - sound expander
“Tel Ray began making analog guitar effects in the 60’s for companies like Fender. They made these effect boxes, which use an amps built in spring reverb via RCA, to act as external sources for watery vibrato, reverb, echo, delay and other effects. These units had to compete with guitar pedals, which made them far less in demand due to their size, transportability, and difficulty to fix. To this day, we still don’t know what the magnetic disc & wipers are made from. Tel Ray soon became Morley, in an attempt to say that their products emulated Leslie amps.The Dimensions IV features Vibrato and Reverb and an off/on switch. It’s pretty basic but offers incredible tone. The Vibrato works great, turn up the treble and you can hear how full it sounds thru the oil can. Supposedly the ‘slap back’ or delay timing can be reset/changed in the back of the unit. The reverb doesn’t function properly. I’m not sure if it’s my amps spring reverb that is weak, or if it’s a connection issue. All internal mechanics are intact, may need a tech to look at it. “
cred. reverb.com/Trays Vintage
fender - dimension IV sound expander
“The Dimension iv was built and designed for Fender by TelRay and produces sound in much the same way as the Morley EVO-1 by use of an oil can filled with a mysterious fluid (UCON B-65.) Unlike the EVO-1, the Dimension iv has a single speed motor, and no onboard power. The effect works by being routed with rca cables into the reverb channel of a Fender amplifier (where the reverb potentiometer controls the amount of the effect.) This is a very interesting, functioning relic from a bygone, far eerier time.Height is 6 in. (15.2 cm.), 8 1/2 in. (21.6 cm.) width, and 6 1/4 in. (15.9 cm.) deep. "
cred: gbase.com/Retrofret