Paris 2024: Clearing the Air

A quartet of mushroom-shaped structures tower nearly 6 meters above the Olympic Village. Known as Aerophiltres, these devices filter particulates out of the air to provide cleaner air for the Village, despite its proximity to major roadways.  (Image credit: SOLIDEO/C. Badet; via DirectIndustry) Catch our past and ongoing Olympic coverage here. Read the full article

Driven From Equilibrium

With the right application of force, liquids can take on shapes that defy our intuition. Here researchers sandwiched two immiscible oils between glass slides and applied an electric field. (Image, video, and research credit: G. Raju et al.; via Physics World) Read the full article

Many species of spider fly with a technique calling ballooning. We've touched on spider flight before, but more recent research adds a new dimension to the phenomenon. (Video and image credit: BBC; research credit: E. Morley and D. Robert)

Eutectic gallium-indium alloy is a room-temperature liquid metal with an extremely high surface tension. (Image and video credit: K. Hillaire et al.)

This polygonal pattern is known as the rose-window instability. It’s formed between two electrodes -- one a needle-like point, the other flat -- separated by a layer of oil. The pointed electrode’s voltage ionizes the air nearby, creating a stream of ions that travel toward the flat electrode below. Oil is a poor conductor, however, so the ions build up on its surface until they’re concentrated enough to form a dimple that lets them reach the lower electrode. At higher voltages, the electrical forces driving the ions and the gravitational force trying to flatten the oil reach a balance in the form of the polygonal cell pattern seen above. Smaller cells form near the needle electrode, where the electrical field is strongest and the temperature is highest, as revealed in thermal and schlieren imaging (lower images) that shows a warm stream of gas impacting there. 

As a final note, I’ll add that the latest in this research comes from a paper by a Pakastani teenager. It’s never too early to start contributing to research! (Image and research credit: M. Niazi; via NYTimes; submitted by Kam-Yung Soh)

Here you see a millimeter-sized droplet suspended in a fluid that is more electrically conductive than it. When exposed to a high DC electric field, the suspended drop begins to flatten. A thin rim of fluid extends from the drop’s midplane in an instability called “equatorial streaming”. As seen in the close-up animation, the rim breaks off the droplet into rings, which are themselves broken into micrometer-sized droplets thanks to surface tension. The result is that the original droplet is torn into a cloud of droplets a factor of a thousand smaller. This technique could be great for generating emulsions of immiscible liquids--think vinaigrette dressing but with less shaking! (Image credit: Q. Brosseau and P. Vlahovska, source)

A falling jet of viscous fluid--like honey or syrup--will often coil. This happens when the jet falls quickly enough that it gets skinnier and buckles near the impact point. Triggering this coiling typically requires a jet to drop many centimeters before it will buckle. In many manufacturing situations, though, one might want a fluid to coil after a shorter drop, and that’s possible if one applies an electric field! Charging the fluid and applying an electric field accelerates the falling jet and induces coiling in a controllable manner. 

An especially neat application for this technique is mixing two viscous fluids. If you’ve ever tried to mix, say, food coloring into corn syrup, you’ve probably discovered how tough it is to mix viscous substances. But by feeding two viscous fluids through a nozzle and coiling the resulting jet, researchers found that they could create a pool with concentric rings of the two liquids (see Figure C above). If you make the jet coil a lot, the space between rings becomes very small, meaning that very little molecular motion is necessary to finish mixing the fluids. (Image credits: T. Kong et al., source; via KeSimpulan)

Boiling water plays a major role in the steam cycles we use to generate power. One of the challenges in these systems is that it’s hard to control the rate of bubble formation when boiling. In this video, researchers demonstrate their new method for bubble control in a clever and amusing fashion. The twin keys to their success are surfactants and electricity. Surfactant molecules, like soap, have both a polar (hydrophilic) end and a non-polar (hydrophobic) end. By applying an electric field at the metal surface, the researchers can attract or repel surfactant molecules from the wall, making it either hydrophobic or hydrophilic depending on the field’s polarity. Since hydrophobic surfaces have a high rate of bubble formation, this lets the scientists essentially turn nucleation on and off with the flip of a switch! (Video credit: MIT Device Research Lab; see also: research paper, MIT News Video, press release)

Do you enjoy FYFD and want to help support it? Then please consider becoming a patron!

This short film offers an artistic look at the phenomenon of the water bridge. When subjected to a large voltage difference, such as the 30 kV used in the film, flow can be induced between water in two separated beakers. This creates a water bridge seemingly floating on air. There are two main forces opposing the bridge: gravity, which causes it to sag, and capillary action, which tries to thin the bridge to the point where it will break into droplets. These forces are countered by polarization forces induced at the liquid interface due to the electrical field separating the water's positive and negative charges. This separation of charges creates normal stresses along the water surface, which counteracts the gravitational and capillary forces on the bridge. The artist has done a beautiful job of capturing the unsteadiness and delicacy of the phenomenon. (Video credit: Lariontsev Nick)

The interaction of electric fields and fluids can lead to some unexpected results. Here we see the formation of a water bridge formed between two beakers of demineralized water across which a large voltage difference (~15kV) is applied. The bridge is stable for separation distances up to about 2 cm. In order to achieve this feat, the water is overcoming two destabilizing forces: gravity, which bends the bridge, and capillary action, which makes the liquid bridge thin until it breaks into droplets. According to the authors, both forces are countered by induced polarization forces at interface; in short, the electrical field around the liquid causes the positive and negative charges in the liquid to separate, thereby polarizing the liquid. This separation of charges then creates normal stresses along the surface of the water that oppose the gravitational and capillary forces trying to break the bridge. (Video credit: A. Marin and D. Lohse)

A droplet of glycerol coalescing in silicone oil while subjected to strong electric fields exhibits a whip-like instability reminiscent of fireworks. Check out videos of the phenomenon or see the paper for more information. Happy Independence Day to our American readers!

For more fun, holiday-themed high-speed video, check out PopSci's fireworks videos.

If a fluid is electrically conductive, then magnetohydrodamics (often abbreviated as MHD) describe its behavior. Electric and magnetic fields can be used to stir such a fluid, as in the video above. By inducing a potential difference across the electrodes lining the walls and the disk-shaped electrodes far from the walls, complicated flow patterns can be produced. #

When jets of liquid are introduced into an electrified medium in a process known as electrospinning, they can exhibit behavior known as whipping instabilities.